4.6 LUBRICATION AND MAINTENANCE SCHEDULE MAINTENANCE 4.6.3 PERIODIC SERVICING SCHEDULE (1) Perform maintenance according to separate Engine Operation an Maintenance Manual filed in volume 2 binder. (2) Perform inspections according to the separate Manual ”FIRE DETECTION AND ACTUATION SYSTEM” filed in volume 2 binder.
290 Service Intervals Service Point Service See When necessary Engine Air Cleaners Maintenance page 305 Swing circle toothing Immediately apply grease if bare spots are visible page 309 Automatic lubrication systems Fill grease containers Clean or replace filter elements page 311 Track rollers If leakage occurs replace floating seals and fill with GL SAE 90 EP or ISO VG CLP 220 page 315 Carrier rollers Guide wheels Cold starting aid Replace fluid cartridges (1) Every 10 operating hours or daily Excavator Walk-around inspection page 319 Working attachment Check grease injectors of auto- matic lubrication system. Check for proper lubrication.
page 321 Swing circle Check grease injectors of auto- matic lubrication system. Check for proper lubrication. page 325 Air cleaners Clean pre-cleaner page 327 Radiators Check coolant level page 329 Track groups Clean, esp. in winter page 329 Engines Check oil level (1) Fire detection and actuation system Inspections (2) Every 50 operating hours or weekly Swing gears and Motor adapter housings Check oil levels page 331 Travel gears, Brake housings and Motor adapter housings Check oil levels page 333 PTO’s (Pump distributor gears) Check oil level page 339 Hydraulic access ladder Check safety sensor page 343 Hydraulic oil cooler and radiator Check and clean as necessary page 345