46 Safety Belts WARNING: Failure to replace the safety belt assembly under the above conditions could result in severe personal injuries in the event of a crash. Energy Management Feature This vehicle has a safety belt system with an energy management feature at the front outboard seating positions to help further reduce the risk of injury in the event of a head-on crash. The front outboard safety belt systems have a retractor assembly that is designed to pay out webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupant’s chest. Safety Belt Extension Assembly WARNING:
Do not use extensions to change the fit of the shoulder belt across the torso. If the safety belt is too short when fully extended, you can obtain a safety belt extension assembly from an authorized dealer. Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is located at the end of the webbing on the label. Also, use the safety belt extension only if the safety belt is too short for you when fully extended. Lap belts The front center lap belt does not adjust automatically. WARNING: The lap belt should fit snugly and as low as possible around the hips, not across the waist.
Insert the tongue into the correct buckle (the buckle closest to the direction the tongue is coming from). To lengthen the belt, turn the tongue at a right angle to the belt and pull across your lap until it reaches the buckle. To tighten the belt, pull the loose end of the belt through the tongue until it fits snugly across the hips. 2015 F-650/750 (f67) Owners Guide gf (ownloose) , 1st Printing, December 2013 Canadian_French (fr_can)