Komatsu — 21.1 INTRODUCTION OF NECESSARY TOOLS

21. STANDARD TIGHTENING TORQUES 21 .I INTRODUCTION OF NECESSARY TOOLS The following tools are needed when carrying out maintenance. No Name of tool Part No. Remarks Width across flats Sl, S2 End wrench - 8x10 mm End wrench - 12x14 mm End wrench - 13x17 mm I%=Q 1. Wrench Set 09000-30006 End wrench - 19x22 mm S2 End wrench - 24x27 mm End wrench - 30x33 mm End wrench - 7/16X1/2 End wrench - 9/l 6x5/8 End wrench - 518x1 l/16 End wrench - 3/4x13/16 End wrench - 15/l 6x1 Screwdriver - l/4 shank Screwdriver - 3/8 shank Ball peen hammer Pry bar - 9116x16 Adjustable wrench Punch - 5/l 6x10 Chisel - 7/8x1 0 Punch - 3/l 6x10 Vise grip wrench Slip joint plier Diagonal (side) cutter Tool box 2.

Tool Kit 276 820 R91 3. Filter Wrench DR02-535 Removal of filter cartridges. 4. Grease Pump 999 677 R91 For lubrication of machine. For details of the fluid to use, see 20. USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE. 5. Grease Cartridge If any of the above tools are broken, please order them from your Komatsu distributor. When not using the tools, always put them in the appropriate tool box. 3-14