24. SERVICE PROCEDURE 24.7 EVERY 500 HOURS SERVICE 24.7.1 CHECK HOSE CLAMP TORQUE REMARK Check all hose clamps except those on the air intake system. Check the torque. Refer to 21. STANDARD TIGHTENING TORQUES. 24.7.2 CHECK ROPS MOUNTING BOLT NUT TORQUE Check the torque at four places. w Mounting Bolt Nuts: 822 f47 Nmm (605 f35 Ibf ft) 24.7.3 CHECK TRACK SHOE BOLT TORQUE The bolts used for attaching the shoes to the tracks are heat treated alloy bolts and will stand a considerable tightening strain. Ordinary bolts must not be used. Nuts must be assembled so that washer face is not against track link. Radius side of nuts must be against track link. Torque bolts to below listed value.
a Track shoe bolt: 90 220 N*m (65 +I5 Ibf ft) plus 120” + 120” designates two flats of the bolt head. 24.7.4 INSPECT MOUNTED EQUIPMENT Inspect for operational damage. Correct as required 24.7.5 RADIATOR LEAKS 1. Check for and correct any leaks at the radiator and its connecting parts. 24.7.6 OUTSIDE OF RADIATOR CORE 1. Clean the outside of the radiator core. 3-41