24. SERVICE PROCEDURE 24.13 TURBOCHARGER: D38E-I, D38P-1, D39E-I AND D39P-1 I 14134 MOVING IMPELLER ACCESSIBLE INLET SHIELD PROTECTS TO OBJECTS AND HANDS HAND AND TURBOCHARGER 24.13.1 PRECAUTIONS I A WARNlNG I In certain type of engine service, the turbocharger air inlet hose must be removed so other parts are accessible for service or repairs. When the air inlet hose is removed, THE TURBOCHARGER IMPELLER IS EXPOSED AND CAN CAUSE SERIOUS PERSONAL INJURY AND/OR ENGINE DAMAGE. Engine operation creates vacuum in the compressor strong enough to suck objects into the impeller. It is imperative to install a safety shield on the turbocharger inlet opening whenever air inlet hoses are removed.
Failure to follow this precaution could result in serious injury. REMARK Only in extreme circumstances should an engine be run without clean, filtered air. REMARK Shield is available from your distributor. Shut down engine prior to removing air intake hose or attempting to install a protective shield. I A WARNlNG Tag all controls to prevent inadvertent starting. To install shield, remove air intake hose. Position shield over air intake opening so screen rests securely against edge of opening. Position adjustable thumb screws so shield is firmly attached. 3-68