12. OPERATION 12.14 CHECK AFTER STOPPING ENGINE 1. Walk around the machine and check the work equipment, paintwork, and undercarriage, and check also for leakage of oil or water. If any abnormalities are found, repair them. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud stuck to the undercarriage. 12.15 LOCKING Always lock the following places. Commercially available locks can be fitted to the following places. 1. Instrument panel; Rotate cover (A) upward and secure with lock through tang (B). 2. Access cover on engine hood. 3. Left side engine access door. 4. Battery box door. 5.
Fuel tank cap. 6. Hydraulic tank door. 7. Right side engine access door. 2-55