OPERATION Front Working Lamp Switch Always turn the working lamp OFF before traveling on public roads. Use the front working lamp switch (15) to turn on the front working lamp. Position (a): Working lamp and pilot lamp (A) light up. Position (b): Working lamp goes out. Rear Working Lamp Switch Always turn the working lamp OFF before traveling on public roads. Use the rear working lamp switch (16) to turn on the rear working lamp. Position (b): Working lamp goes out. Position (a): Working lamp and pilot lamp light up. Hazard Lamp Switch Use the hazard lamp only in emergencies. Using the hazard lamp when traveling may cause confusion for other machine operators.
Use the hazard lamp switch (17) to put all the signal lamps in the flashing mode. Use this switch in emergencies, such as when the machine breaks down and has to be parked on the road. Position (A): Direction indicator lamp and directional indicator pilot lamp flash, and pilot lamp (A) lights up at the same time Position (B): Lamps go out. Rear Wiper Switch Use lever (E) on rear wiper switch (18) to operate the rear wiper. Position (A): Washer liquid is sprayed out. Position (B): OFF Position (C): Wiper is operated. Position (D): Washer liquid is sprayed out; wiper is operated. 2-54 WA250-6