Komatsu — Accelerator Pedal

Work Equipment Lock Lever OPERATION Before leaving the operator’s seat, set the work equipment lock lever securely to the LOCK position. If the work equipment lock lever is not at the LOCK position and the work equipment control lever is touched by mistake, it may lead to a serious accident. If the work equipment lock lever is not set securely to the LOCK position, the work equipment control lever may move; this may lead to a serious accident or personal injury. Check that the lever is in the LOCK position. When operating the work equipment lock lever, check that the work equipment control lever is held securely at the HOLD position.

When pulling up or pushing down the work equipment lock lever, be careful not to touch the work equipment control lever. The work equipment lock lever (3) is a device to lock the work equipment control lever and prevent operation of the work equipment. Push the work equipment lock lever down to lock it. Remark If the lever is at the LOCK position, the work equipment does not move even when the work equipment control lever is operated. Accelerator Pedal The accelerator pedal (4) controls the engine speed and output. The engine speed can be freely controlled between low idling and full speed. WA250-6 2-59