Komatsu — Slow-Blow Fuse

OPERATION Slow-Blow Fuse If the power does not come on when the starting switch is turned to the ON position, the slow-blow fuse may be blown. Check and replace it, if necessary. The slow-blow fuse box is on the left side of the machine, at the side of the engine. 1. Open the cover (1). 2. Open the cover of slow blow fuse box (2) and inspect the fuse. For details about replacing the slow blow fuse, see “Replace Slow- Blow Fuse” on page 3-50. Slow-Blow Fuse 2-72 WA250-6 (A) 80A Chassis power source (B) 120A Engine preheating power source (C) 50A Battery power source (starting, hazard)