OPERATION Final Checks Before Starting Engine Before starting the engine, check that the work equipment lock lever is securely at the LOCK position. If the work equipment control lever is touched by mistake when the engine starts, the work equipment or machine may move unexpectedly, leading to serious injury or damage. 1. Check that parking brake lever (1) is at the LOCK position. 2. Check that directional lever (2) is at the neutral position (N). Remark If the directional lever is not at the N position, the engine will not start.
When directional selector switch actuation switch (3) is ON, the engine will not start if directional lever (2) and directional selector switch (4) are not both at the N position. WA250-6 2-89