OPERATION 2. If the preheating pilot lamp (2) does not light up, or it lights up and then goes out to indicate that the engine preheating has been completed, turn the key in starting switch (1) to the START position (C). The starting motor will continue to turn and the engine will start. 3. Keep the key in starting switch (1) at the START position (C) to keep the starting motor running until the engine starts. Remark In low temperatures, to ensure lubrication of the engine and to improve the durability, no fuel is supplied to the engine for three seconds after the key in starting switch (1) is turned to the START position (C); the engine does not start during this time.
Keep the key in starting switch (1) at the START position (C) to keep the starting motor running until the engine starts. 4. After the engine starts, release the key in starting switch (1). The key automatically returns to the ON position (B). 2-92 WA250-6