Clean Axle Case Breather MAINTENANCE Apply the parking brake and lock the front and rear frames with the frame lock bar. 1. Stop the engine and set the parking brake lever to the LOCK position. 2. Set the frame lock bar to the LOCK position. 3. Use a brush to clean off all the mud or dirt from around the breather. 4. Remove the breather and soak it in cleaning liquid and clean it. 5. Clean the breather at two places (front and rear). A: Front axle B: Rear axle Remark When removing the breather, be careful that dirt or dust does not get into the axle case. 6. Install the breather. WA250-6 3-37