Komatsu — Clean Transfer Case Breather

MAINTENANCE Remark Before starting the engine, check that the oil level is between the (C) and (D) marks on the COLD STOP side of the dipstick. When checking the oil level, complete the warming-up operation of the transfer, then use the HOT IDLE side of the dipstick to make the final check of the oil level. For details, see “Check Oil Level in Transfer Case, Add Oil” on page 3- 33. 10. Check that there is no leakage of oil from the transfer case. Clean Transfer Case Breather 1. Remove cover (1). 2. Remove all mud and dirt from around the breather (2). 3. Remove breather (2) and fit a cover to the breather mounting hole to prevent dirt from entering. 4.

Soak the breather (2) in washing liquid and wash it. 5. Install the breather. 3-72 WA250-6