MAINTENANCE Lubricating 1. Using a grease pump, pump in grease through the grease fittings marked by the arrows. 2. After greasing, wipe off any old grease that was pushed out. (1) Center hinge pin (two places) Check Engine Air Intake Piping Clamps for Looseness Ask your Komatsu distributor to check the clamps between the air cleaner - turbocharger - after cooler - engine. Check Alternator Drive Belt Tension, Adjust Since inspection and replacement of the fan belt requires special tools, contact your Komatsu distributor. Remark The machine is equipped with an auto-tensioner; there is no need to adjust the tension.
If the alternator drive belt exhibits any of the following problems, the belt must be replaced. Ask your Komatsu distributor to replace the belt. When there are tears (3) in part of the belt When horizontal scratch (1) crosses vertical scratch (2) In case (4) where there are horizontal scratches only, there is no need to replace the belt. 3-76 WA250-6