Komatsu — Lubricating

MAINTENANCE Every 4000 Hours Service Maintenance for every 50, 100, 250, 500, 1,000, and 2,000 hours service should be performed at the same time. Lubricating Carry out the greasing once every two years, regardless of whether the 4,000 hour interval has passed. If you fail to grease the drive shaft, the shaft will break. There is a danger that the broken shaft will cause serious damage to the machine. To avoid this problem, always maintain the specified greasing interval strictly. 1. Lower the work equipment completely to the ground and stop the engine. 2. Using a grease pump, pump in grease through the grease fittings marked by the arrows. 3.

After greasing, wipe off any old grease that was pushed out. (1) Front drive shaft (2 places) (2) Rear drive shaft (2 places) (3) Drive shaft spline (1 place) 3-88 WA250-6