OPTIONS, ATTACHMENTS HYDRAULIC QUICK COUPLER Before operating the machine, check that the attachment is correctly connected. If it is not correctly installed, the attachment may fall off and cause serious injury. Check that the quick coupler attachment switch is at the CONNECT position. Check that the coupler plunger is completely inserted into the attachment. Removing Attachment 1. Tilt the attachment. 2. Keep the work control lever at the TILT position (e). 3. Pull lock (A) of the quick coupler attachment switch in the direction of the arrow (c); and push in to RELEASE position (a) to release the connection.
For more details about the quick coupler attachment switch, see “Quick Coupler Attachment Switch (if equipped)” on page 2-45. 5-12 WA250-6