Komatsu — Installing Attachment

OPTIONS, ATTACHMENTS Installing Attachment 1. Pull lock (A) of the quick coupler attachment switch in the direction of the arrow (c), and push in to RELEASE position (a). 2. Check that the coupler plunger is completely pulled in. 3. Tilt the coupler forward; drive the machine slowly forward; and set so that the attachment hook is aligned with the puller tube. 4. Raise the coupler slowly; connect the coupler tube to the attachment hook; then raise the coupler until the attachment rises slightly off the ground. 5. Check that the attachment is horizontal to the left and right and that each hook is correctly inserted. 5-14 WA250-6