OPERATION Remark The ID number and item name of the item needing replacement are displayed on the top line of the character display. The time remaining until replacement and the total number of times that replacement was carried out are displayed on the bottom line. If the replacement time has already passed, a minus (-) sign appears before the time. After the display appears for 30 seconds, it does not appear again until the starting switch is turned to the ON position. The message in the illustration is not shown on the character display if an action code is being displayed. If there are two or more items to be displayed, the display changes repeatedly every three seconds.
If there are more than 10 items, all the items are displayed once each and then the display returns to the normal display. The display appears when there are 30 hours remaining until the filter or oil replacement time. If the replacement time has passed, a minus (-) sign appears before the time for the first 30 hours. When more than 30 hours have passed, the display is no longer given. The maintenance caution lamp flashes as the replacement time approaches; after the replacement time has passed, it illuminates.
Items for Display of Filter, Oil Replacement Time 2-12 WA250-6 Item Replacement Interval (H) Character Display ID Number Engine oil 500 ENG OIL 01 Engine oil filter 500 ENG FILT 02 Fuel pre-filter 500 FUEL P FILT 41 Fuel filter 1000 FUEL FILT 03 Transfer oil 1000 TRANSF OIL 25 HST oil filter 1000 HST FILT 26 Hydraulic filter 2000 HYD FILT 04 HST drain filter 2000 HST FILT 43 Hydraulic oil 2000 HYD OIL 10 Axle oil 2000 AXLE OIL 15