Brake Oil Pressure Caution Lamp OPERATION The brake oil pressure caution lamp (1) illuminates when the brake oil pressure goes below the specified value. When carrying out the check before starting (starting switch at the ON position, engine stopped) Because the brake circuit is not actuated, the brake oil pressure caution lamp and central warning lamp do not illuminate and the alarm buzzer does not sound. During operation (engine running) If the brake oil pressure decreases during operation, the brake oil pressure caution lamp and central warning lamp illuminate and the alarm buzzer sounds intermittently.
At the same time, “E03” is displayed on the top line of the character display and “CHECK RIGHT NOW” and “CALL” alternately on the bottom line for three seconds each. Stop the machine immediately in a safe place; stop the engine; and carry out inspection. When the brake oil pressure caution lamp illuminates, the foot brake may not work. Keep the parking brake applied to prevent the machine from moving. Immediately after the engine starts, the accumulator is being charged. The brake oil pressure caution lamp illuminates but the central warning lamp does not illuminate and the alarm buzzer does not sound.
Keep the parking brake applied to prevent the machine from moving until the brake pressure becomes normal and the brake oil pressure caution lamp goes out. Engine Oil Pressure Caution Lamp The engine oil pressure caution lamp (2) illuminates to warn the operator that the engine lubricating oil pressure has dropped. When carrying out the check before starting (starting switch at the ON position, engine stopped) This lamp does not illuminate. During operation (engine running) If the engine lubricating oil pressure decreases during operation, the engine lubricating oil pressure caution lamp and central warning lamp illuminate and the alarm buzzer sounds intermittently.
At the same time, “E03” is displayed on the top line of the character display and “CHECK RIGHT NOW” and “CALL” alternately on the bottom line for three seconds each. Stop the machine immediately in a safe place; stop the engine; and carry out inspection. WA250-6 2-15