Komatsu — Traction Control Operation Pilot Light

OPERATION Directional Selector Pilot Lamp The directional selector pilot lamp (5) illuminates when the directional selector switch actuation switch on the right switch panel is turned ON. It is possible to switch the direction of travel of the machine between FORWARD and REVERSE using the directional selector switch on the work equipment control lever. For details, see “Directional Selector Switch” on page 2-55. Economy Operation Display Lamp The economy operation display lamp (6) illuminates when the economy mode is used. S Mode Operation Pilot Lamp The S mode operation pilot lamp (7) illuminates when the S mode is selected. Use the traction control switch to select S mode.

Remark When the S mode has been selected, if the traction cancel switch is pressed, the S mode is cancelled and the lamp (7) goes out. To set the S mode again and illuminate lamp (7), press the traction cancel switch or change the position of the directional lever.. Shift Hold Pilot Lamp The shift hold pilot lamp (8) is not used. Traction Control Operation Pilot Light The traction control operation pilot lamp (9) illuminates when traction control is set to ON. Use the traction control switch to turn ON traction control. When traction control ON has been selected, if the traction cancel switch is pressed, traction control ON is cancelled and lamp (9) goes out.

To turn the traction control ON again and illuminate lamp (9), press the traction cancel switch or change the position of the directional lever. For details, see “Traction Control Switch” on page 2-49. 2-26 WA250-6