Komatsu — FUSE

. OPERATION EXPLANATION OF COMPONENTS REMARK A fusible link refers to the large-sized fuse wiring installed in the high current flow portion of the circuit to protect electrical components and wiring from burning, in the same way as an ordinary fuse. CONTROLLERS Governor and pump controller is installed. FUSE 3 - 49 FUSIBLE LIN When the start starting switch er motor does not function, aft ON, the fusible link on the wiri er turning the engine ng may be broken. In that case open of the machine the cover of the batter box loc , and check and replace it. NOTICE Take care so t hat these controllers do not get wet with water or mud. It may cause a f If anything un ailure.

usual has developed on any of the controllers, do not attempt to ove rhaul it by yourself, but call your Komatsu distributor for check and rep air. the door inside the main control box in a wet weather Do not open condition. If it has to be opened by all means fo r some reason or other, take care so th at dust or rainwater will not get i n the box. FUSE BOX NOTICE Before replacing a fuse, be sure to turn off the sta The fuses prote ct the electrical equipment an d wiring from burning out. If t he fuse beco mes corroded, or white powde r can be seen, or the fuse is loose in the fuse holder, replace the f use. the same capacity. When replac ing the fuses, use ones with