. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE WARNING WALK-AROUND CHECK WARNING 3 - 51 Ensuring the safety at the job site e work, confirm that there is no danger in the job site. e job, level the ground as evenly as possible. Before starting th e work, confirm that there Before starting th e job, level the ground as evenly as When working on a public road, ensure the safety for both pedestrians and passing vehicles by manni ng a gu ide and putting up a fence aroun d to turn the area off-limit. Inflammables piled on the intensely heated en gine parts like an exhaust muffl er and on the battery or fu el and oil leakage can cause a fire on the m achine.
Make a thorough che ck, and if something unusu al is found, be sure to fix it or inf orm it to the komatsu distributor i n your t erritory. Before starting the engine, walk around th e machine and look at the un derside of chassis for a nythin g unusual like loose bolts and n uts, leakage of fuel, oil and coolant. Also check the condition of the work equipment and the se wiring, play, and collection of dust at places that reach high temperature. he items listed here before starting the engine for the day's work. age, wear and play of the work equipment, hydraulic cylinders and hoses nd the hydraulic system.
Also check for loo se wiring, play, and coll ection of dust at places that reach high temperature Be sure to check t he items listed here bef ore starting the engine for th 1. Check for dam Check the wo is found, fix it. 2. Removing dus Walk around t 3. Check for coo Check for oil le it. 4. Inspection of t Check around specified plac Furthermore in remove them, 5. Inspection of t Inspect the su 6. Inspection of t Inspect the he them. 7. Check for oil l Check for oil l 8. Check of the u Check track s Repair them if 1. Check for dam age, wear and play of t he work equipment, hydraul rk equipment, the hydra ulic cylinders and hoses for any damage, wear and play.
I f any of them t from the engine parts and the radiator he engine and the radiator to check if dust is piled up on any of them. Remove it, if any. lant and oil leakage around the engine 2. Removing dus t from the engine parts and the he engine and the radia tor to check if dust is piled u p on any of them. Remove it, if any. 3. Check for coo lant and oil leakage aro und the engine akage from the engine and coolant leaks from the co oling system. If any problem is found , repair he operator's platform the operator's platform to see if there is any parts or tool left, and put it back or move to the e. spect the platform floor , control levers, handrails, ste p, etc.
for mud, oil, sno w stuck to them, and if any. he lamps for smudge rface of the lamps for any smudges, and wipe them out, if any. he head lamps and the working lamp 5. Inspection of t rface of the lamps for a ny smudges, and wipe them 6. Inspection of t he head lamps and the working lamp ad lamps and the worki ng lamp to determine that th ey are suited to the wor k, and i f not, r eplace eakage from hydraulic equipment, hydraulic tank, hoses, and joints eakage. If any problem is found, repair the area where oil is leaking. ndercarriage parts hoe, sprocket, idler, guard for damage, wear, loose bolts, or leakage of oil from rollers, etc. any trouble is found. 7.
Check for oil l eakage from hydraulic e quipment, hydraulic tank, h eakage. If any problem is found, repair the area whe 8. Check of the u ndercarriage parts hoe, sprocket, idler, gua rd for damage, wear, loose bolts, or leakage of oil f rom ro llers, e tc. any trouble is found.