Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK BEFORE STARTING CHECK COOLANT LEVEL, ADD COOLANT WARNING that the FULL level leakage of immediately. If that the FINS, 3 - 53 Do not open the radiat or cap unless necessary. Wait for the engine to cool d own before checkin g the coolant in the su b-tank. Immediately after the engine is stopped, the coolant is a t a high temperatur e and the radiator is under high internal pr essure If the cap is removed to check the coolant level in this c ondition, there is a hazard of burns. W ait for the temperatur e to go down, then turn the c ap slowly to release the pressure 1.

Open the door u nder the precleaner and ch coolant is in the ra nge between the FULL and L sub tank (1). If th e level is low, add water to th filler of sub tank (1). nt, tighten the cap securely. through the water 2. After adding coola 3. If the sub-tank (1 ) is empty, there is probabl ecting, repair any problem im coolant. After insp there is no proble m, check the coolant level in t the coolant level is low, add coolant to the radiato sub-tank (1). CHECK AFTERCOOLE R FINS e duct at the top of the mac 1. 2. 1. Check through th aftercooler fins ar e not clogged with dust or leav 2. If there is any abno rmality, carry out cleaning. Fo "CLEAN, INSPEC T RADIATOR AFTERCOOLER