. OPERATION OPERATION OPERATIONS AND CHECKS AFTER STARTING ENGINE WARMING UP OPERATIONS WARNING 3 - 74 Emerg When a failure or s omething unusual ta kes place on the ma chine, turn the s tarting s witch ke y to the OFF positi on, and the electric al system c eases to function and the engine stops. Th en ask t he Komat su distributor in y our territ ory for the inspection. If you t ry to o pera te the work equipme nt without sufficient machi ne warming-up, th e work equipmen t may res pond t o an activat ed control le ver or switch only sl owly, or move again st the operator's intentio n, or an automate d operati on does not functio n properly.
Hence be sure to war m up the machine pri or to st arting the work. T his particularly ap plies to th e cold s tart, which r equires sufficient machine warm NOTICE The hy draulic oil te mperature is normal at 50 to 80°C (122 to 176°F ). Even if it becom es unavoidable to operate t he machine with lo w hydraulic oil temperature, wait until the hydraulic oil temperature ris es up to approx. 2 0°C (68° F) before s tarting with work. T hat practice helps extend the ma chine life. and work equipment with the hydraulic oil temperature lower than 20°C (68°F). Avoid a jerky operation of control levers and work equipmen t with the hydra ulic oil te mperatu re lower than 20°C (68°F).
Do not accelerate t he engine suddenly u ntil the warming-up r un is fi nished. M oreover, do not r un the en gine at low idling (low runnin g speed ) or a t high idling (high run ning speed) for mor e than 2 0 minutes . Such p ractice n ot only af fects the e nvironment advers ely, but also can cause trouble to the internal mechanism of turbochar ger and engine. I n case th at idling t he engin e is require d, run t he e ngine at medium spe ed from time to time, which applies lo ad to th e engine.
REMARK If the engine coolant temperature is above 30°C (86°F ), to p rotect th e turbocharger, the eng ine spee d does not rise fo r 2 second s after starting, ev en if the fuel contr ol dial is turne d. monitor display will be white. If the hydraulic o il temperature is lo w, the hydraulic o il temperature monitor display will be