. OPERATION OPERATION STOPPING ENGINE WARNING Do not stop the engine suddenly except in case of emergency, before it cools down. Otherwise durability of the engine 2. Run the engine at low idle for about 5 minutes to cool down gradually. 3. stop the engine. 4. Remove the key from starting switch (1). medium 3 - 79 components ma y be shortened. Sudden stop of t he engine should be limit ed only to a case emergenc Let the engine cool down gradually after th e work and stop it thereafter.
l control dial to low idling po ey in starting switch (1) to the OFF position (A REMARK When the e ngine is overheated, do not stop it on the sp allow it to speed, and If it is requir ed to start the engine again, start it after appr seconds. CHECK AFTER STOPPING ENGINE 1. Walk arou If any leak 2. Fill the fue 3. Check the 4. Remove a nd the undercarriage, crusher , belt conveyor a nd machine covers to check fo r oil and water lea kage. age or abnormality is found, engine compartment for pap er and debris. C lean o ut any paper and debris to avoid a fire ha zard. ny mud affixed to the underc arriage. REMARK If the switch is turned to ON or START withi n approx.
10 se conds a fter stopping the engine , the monitor disp lay is not reset and t he previous screen is displa yed.