Komatsu — SCOPE OF WORKS USING MOBILE CRUSHER

. OPERATION OPERATION NOTICE 1. Start the engine. 2. Set selector switch (1) for the conveyor up/down control panel to CONVEYOR. (Only for machines equipped with muck discharge conveyor.) 3. Press conveyor UP switch (2) and remove the conveyor from the mount hook. 4. Using the conveyor up/down control switch, set the mount hook to fixed position (3) for crushing reinforced concrete. 3 - 113 KEEPING SOME HEIG When crushing reinfo rced concrete debris, it is advisab le to increase the clearance b etween the crusher un derside and the belt conveyo r top to ensure good discharge o f the debris.

If many long reinforc ing bars are contained in the rein forced concrete debris to be crushed, adjust the po sture of the primary belt conv eyor in the following manner prio r to the star A reinforced concrete d ebris block larger than 13 mm (0.5 in) in diameter a nd longer than 600 mm (23.6 in) must not be crushed, since it may damage th