. OPERATION OPERATION REMARK O.S.S (Open Set Side) is the width when the outlet clearance of the jaw crusher is fully opened. 3 - 118 CRUSHING ASPHALT CON CRETE DEBRIS The mobile crusher can crush a sphalt concrete debris produced in a road construction site. NOTICE Asphalt concrete rubble has high v iscosity, so be careful of the following points when carrying out the opera tion. If discharge port clearance (A) is set to less than 80 mm (3.2 in) (OSS), packing will occur more easily chamber of the jaw crusher, so (A) of the jaw crusher within a ran at discharge port (B) of the crushing use with the discharge port clearance ge of 80 to 150 mm (3.2 to 5.9 in) (OSS).
If the crushing effect drops be cause of the viscosity, press selector switch (14) on the crusher spee screen, then use selector switch rotating speed and switch to possible to prevent softening of t makes the operation more effici Asphalt concrete is a mixture of a d setting screen to display the setting es (2) and (3) to throttle the jaw crusher low-speed crushing. This makes it he asphalt caused by friction heat, and ent. sphalt, emulsion, and aggregate, and when it is crushed many times by crushing, it generates heat and cha the jaw crusher during compression nges to tar.
As a result, if it stays for a long time inside the crusher, it clog s the discharge port (creates packing), and finally makes the crusher stop. PRODUCTION OF PRODUC TS UNDER DESIRED SIZE NOTICE When creating products of under 40 , adjust the clearance of the discharge port of the jaw crusher to a larger s etting (for example: 60 to 80 mm (2.4 to 3.2 in) (OSS)), and use a vibratory si eve to adjust the particle size. This will have a great effect both on extendin g the service life of the machine and on production. The jaw crusher carries out roll ing compression and crushing, so particularly for natural roc grain peculiar to rocks may cau se the generation of flat products.
When generating products with a desired particle size, such as under 40 o r under 30, install sieve when carrying out the cru shing operation.