Komatsu — DIRECTIONS FOR USE

. ATTACHMENTS, OPTIONS RADIO CONTROL UNIT Radio control selector switch REMARK Even when the radio control selector switch is at the RADIO CONTROL position, if the mode selector switch on the main panel is not set to the TRAVEL position, the travel will not be actuated even when the travel switch on the radio control transmitter is pressed. In the same way, if the mode selector switch is not set to the OPERATION position, the crusher and feeder will not be actuated even when the crusher and feeder switch on the radio control transmitter is pressed.

6 - 8 NOTICE If the radio control selector switch is at the RADIO CONTROL position, the crusher and feeder cannot be started from the main panel The relationship between the position of the radio control selector switch and the components that can be operated is as shown in the table below. Radio control Main panel Radio control transmitter Main panel ± { { Stop crusher (continuous rotation) { { { ± Manual rotation of crusher ± - { - Start feeder ± { { ± Stop feeder { { { ± 1-touch start ± - { - 1-touch stop { - { - Travel { (Travel lever) { { (Travel lever) ±