. ATTACHMENTS, OPTIONS RADIO CONTROL UNIT WARNING WORK EQUIPMENT OPERATION WITH REMOTE CONTROL WARNING separator, and other optional 6 - 16 B efore carr ying ou t operations with the r emote control, contact the surrounding area t o inform everyone that you are ab out to s tart opera tions. A lways confirm contac t with the other operators to make sur e that they do not o perat e the machine. W hen movi ng the machine off, confirm t hat the area surrounding the machine is safe , and sound the horn b efore moving. D o not allo w anybody to climb onto the D o not allo w anybody to approach the a R emove all obstacles from the travel pat 6.
Turn the fuel control dial in the full speed direction to rais e the engin 7. Operate the transmitter travel cont rol switch as follows. The machine works while the switch is being pressed, stops when the switch is released. FORWARD: Press switches (4) and (5) at the same time REVERSE: Press switches (6) and (7) at the same time Right turn FORWARD: Press switch (4) Right turn REVERSE: Press switch (6) Left turn FORWARD: Press switch (5) Left turn REVERSE: Press switch (7) Counterrotation turn to right: Press switches (4) and (7) a same time Counterrotation turn to left: Press switches (5) and (6) at same time ALL STOP (in emergencies):
Press switch (8) to stop engine The ma chine w orks while the sw stops wh en the switch is released. FORWA RD: Press switches (4) an d (5) at the same time REVER SE: Press switches (6) an d (7) at the same time ch (4) h (6) (5) (7) Right tur n FORWARD: Press swit Right tur n REVERSE: Press switc Left turn FORWARD: Press switch Left turn REVERSE: Press switch Counterrotation turn to right: Press switches (4) and (7) a 8. When fin ishing remote control ope rations, turn the transm itter power switc h OFF, the n set the remote c ontrol selector switch on the machine pa nel to the PANEL posit ion.
Whe n the rem ote control s electorswitch on the machine isset to the R EMOTE CONTROL p osition (a), it becomes possible t o carry out operation s with th e remote control. Alw ays check first that the sw itches on the transmitter ar e not being pressed by m istake. Is p ossible t o start and stop the feeder and crusher with the r emote control. Use the mo nitor panel for the start an d stop operations of th e conveyor , magnetic attachments . The feeder and crusher can also be stopped fr om the monitor p anel