. ATTACHMENTS, OPTIONS HYDRAULIC SECONDARY CONVEYOR LIFTING METHOD Clamp a wire rope firmly to the four lifting brackets by using shackle. 6 - 44 At the time, keep the lifting angl e of the wire r ope belo w 90 When the belt conveyor is hu ng up in the ai r, move i t as slowl e. , never go under the hung belt conveyor. , never go under th e hung b elt co nveyor. *1: The inclin ed leg can be fitted at three place s, but th e center o gravity hardl y changes with thes e places. So, t he conveyor can b lifted with th e same lifting brack CONNECTING METHOD TO MACHINE BODY For details, s ee "PROCEDURE FOR CONNECTING OPTIONS PRECAUTIONS ON OPERATION 1.
When op erating the second ary conveyor t ogether with the p rimary conveyor, arrange t hem so that muck are loaded o or earth belt conv n the centers of th e both be lt conveyors. I f muck ar e not loaded on the centers , the belts will zigzag and sand will fall fro m the be lt conveyors, and t hey will be caught in the tail pull ey. Consequently, the eyors may stop. 2. Keep a c lose watch on the head scraper c onstantl Unless the scraper is in firm contact with the belt, earth stuc to the rollers will likely cause the rollers to wear prematurely he scraper is in firm contact with t he belt, earth stuc lers will likely caus ematurely