. OPERATION EXPLANATION OF COMPONENTS CAUTION ITEMS CAUTION B(1) B(2) B(3) Charge level monitor Fuel level monitor Air cleaner clogging monitor B(4) B(5) Engine coolant temperature monitor Hydraulic oil temperature monitor CHARGE LEVEL MONITOR Monitor (1) warns the operator of an abnormality in the charging system while the engine is running. If charging is not being carried out correctly when the engine is running, the red lamp lights up, and at the same time, all work equipment stops and the horn sounds. If the red lamp lights up, check for looseness of the V-belt, and if there is any abnormality, see "OTHER TROUBLE (PAGE 3-138)".
REMARK When the starting switch is at the ON position, the lamp is always lighted up, and after the engine started, it goes out. When the starting switch is at the ON position, the lamp may light up and the buzzer and horn may sound for a moment when the engine is started or stopped, but this is not an abnormality. If the horn sounds, set the fuel control dial to low idling. The horn will stop. 3 - 12 When the warning mo nitor lamp begin s to fl ash or the revolving w arning la mp lights up, check and id entify the caus e in no time. If l eft unattended for s ome time, it will lead to a failure . These are items wh ich need to be observed whi le the engine is ru nning.
If a ny problem o ccurs, items which need to be repaired as s oon as possibl e are displaye d. lamp will flash to indicate the location of the problem. If there is any probl em, the appropriat e monitor lamp will flash to i ndicate th e location of t he problem.