. OPERATION EXPLANATION OF COMPONENTS foreign material, this switch can be pressed after stopping the jaw crusher to make it easier to remove the foreign material. CONVEYOR MANUAL NORMAL ROTATION SWITCH CAUTION normal direction. reverse direction. 3 - 29 CRUSHER MANUAL NORMAL ROTATION SWITC H This switch (10) is used durin g maintenance an d inspection of the jaw crushe r or to escape from the bridging or b locking condition. The functio but when t n is the same as th he discharge port e manual reverse of the jaw crush rotation switch er is clogged (9), with REMARK ese switches are kept pressed, the jaw crusher rotates in the normal direction or reverse direction.
While th ese switches are k ept pressed, the jaw crusher rotates in t he normal direct ion or reverse directio Switche s (9) and (10) are e ffective only whe n the mode selector switch on the contro l panel is at w orking mode or inspe ction mode. Use the con veyor manual switch for operations only when an abnormality ha s occurred in the c onveyor or whe n carryin g out inspection, m aintenance, or repai r, and use it only for inching operations.
Whe n carrying out this operation, chec k that th e area around the c While this s witch (11) is kept pressed, the conv eyor rotates in the CONVEYOR MANUAL REVERSE ROTATION SWI TCH While this s witch (12) is kept pressed, the conv eyor rotates in the REMARK Switches (1 1) and (12) are eff ective only when t he mode selector switc h on the control p anel is at inspection m ode.