. OPERATION EXPLANATION OF COMPONENTS When numeral input switch (2) is pressed, the scale goes up in direction (B). (A) Feed speed at minimum (MIN): Whole scale is reduced in is increased in direction (B) With the scale, it is possible to adjust the feed speed from the grizzly feeder to the crusher. When numeral input switch (3) is pressed, the scale goes down in optimum position. Guideline for adjusting scale SOFT HARD 3 - 31 FEEDER SPEED SETTING SCREEN SELECTOR S WITCH ion speed of the This s witch (15) is used to chang e the vibrat ion speed the grizzly feeder an d to adjust th e feed speed for r ubble and rock . When directio numeral in n (A).
put switch (3) is pressed, the scale goes down in direction (A (B) Feed speed at maximum (MAX) : Whole sca CRUSHER LOAD SETTING SCREEN SELECTOR SWITCH This sw itch (16) i s designed to maintain the char ge ratio inside the crushe r chambe 0% u nder any w orking conditions and to capaci directio n (A). numeral in When After st arting ope rations, chec k the charge ratio of the crusher for around one hou adjus the