Komatsu — CAP, COVER WITH LOCK

. OPERATION EXPLANATION OF COMPONENTS METHOD OF OPENING AND CLOSING CAP WITH LOCK 3 - 44 CAP, COVER WITH LO CK A l ock is pro vided at the follo wing locations of the m achine; the oil filler of the fuel tank, th e oil filler of the hydraulic oil tank, the main control box cover, the too l box, the engine hood, the battery box cover and the left and righ t side doors. Use the eng ine starting swit ch key when o pening a nd closing the cap Insert the ke y as far as it wi ll go to the sh oulder (A ke turned befor e it is inserted a ll the way, it m ay break TO OPEN TH E CAP e key into the key slot. starting switch key counterclockwise, align the key 1. 2. 1. Insert th e key into the ke 2.

Turn the starting switch key counterclockwise, align key slot with the match mark (3) on the ca p, then op en the cap (1): Ope (2): Lock REMARK A type is used for the fuel tank cap. B type is used for the tank. type, if the cap rotates freely, it is locked. In this , the cap cannot be removed from the tank. starting switch key counterclockwise, align counter A hydraulic With this cked. condition , the cap cannot be removed f rom the t Turn the starting switch key counterclockwise, align counter mark (3) on the cap with the groove of the rotor, then turn the cap slowl y until a click is heard. This rel eases th e lock and the cap can b e opened.

TO LOCK TH E CAP cap until tight, then insert the key into the key slot. 1. Turn the cap until tight, t hen insert the key into the key slo 2. Turn the key counterclo ckwise (but, fo r the B ty pe, turn clockwise) and t ake the key