Komatsu — 3.6.1.2 OPERATIONAL CHECKS

USE OF THE MACHINE 3.6.1.2 OPERATIONAL CHECKS q All the checks must be carried out by the operator while seated, with fastened safety belt. q When the machine is at rest after use or maintenance, some safety locks may not be engaged; when the operator gets into the cab, he must make sure that all the mechanical safety locks are engaged and that the equipment cannot move suddenly and create dangerous situations. The checks are intended to verify: 1 - if the safety locks of the front bucket and the backhoe control levers are engaged; 2 - the hand accelerator idling position; 3 - the reversing gear neutral position; 4 - if the gearshift lever is in neutral; 5 - if the parking brake is applied.

The following check is carried out by turning the ignition key to position « » to apply voltage to the control panel and check the functionality of the acoustic alarm, the fuel level indicator and the engine oil pressure, generator, preheating, parking brake warning lights. RWA01960 NOTE q The acoustic alarm sounds and the warning lights remain on for approximately 3 seconds. 133 WARNING