Komatsu — 3.6.2.2 STARTING WITH COLD ENGINE OR IN COLD CLIMATES

USE OF THE MACHINE 3.6.2.2 STARTING WITH COLD ENGINE OR IN COLD CLIMATES q Do not use any fluids or products that facilitate the cold starting of the engine, since these are ether-based and may cause explosions. q Before starting the engine, disconnect all the electric devices (heating, air conditioning, lights, work lights, etc.). q Perform the heating operation carefully. If the machine is not properly warmed up before operating the control levers, its response to the controls will be slow and this may cause unexpected accidents. q If the battery electrolyte is frozen, do not charge the battery or start the engine with a different power source, since the battery may catch fire.

Before charging the battery or starting the engine with a different power source, make the electrolyte melt and make sure that it isn't frozen any more and that there are no leaks. 1 - Turn the key to the preheating position « » for maximum 15 seconds in the coldest weather. The preheating time is determined according to the outside temperature and the ratio is approx. 1 second for each degree below 0°C. RWA01990 2 - Press the accelerator pedal completely and turn the ignition key to position « » (START) for maximum 15 seconds. 3 - As soon as the engine starts, release the ignition key, which will automatically return to position « » and reduce the speed to idling.

IMPORTANT q If the engine does not start at the first attempt, repeat the operations 1 and 2 after waiting for at least 30 seconds, in order not to overload the battery. RWA01970 q For specific applications in cold climates, request the "COLD ARRANGEMENT" configuration to your Komatsu Dealer RWA01980 135 WARNING