Komatsu — 3.15.2 AFTER THE FUEL HAS RUN OUT

TROUBLESHOOTING 3.15 TROUBLESHOOTING 3.15.1 HOW TO REMOVE THE MACHINE q The removal of the machine in case of failure always involves risks that may cause injuries to the persons responsible for this type of operation. q When removing the machine, use a wire rope suitable for the weight of the machine to be removed. If the machine gets stuck in mud and cannot get out using only its motive power, or in case of breakdown, use a wire rope as shown in the figures on the right. IMPORTANT q Before recovering the machine, shift the gear lever to neutral, disengage the four-wheel drive and release the parking brake.

RKA15460 3.15.2 AFTER THE FUEL HAS RUN OUT Before starting the engine, when the fuel has run out and therefore air has entered the fuel supply circuit, it is necessary to bleed the fuel supply circuit. For the necessary operations, see "4.8.10 MAINTENANCE EVERY 500 HOURS OF OPERATION". 160 DANGER