Komatsu — 3.15.3.1 STARTING WITH BOOSTER CABLES

TROUBLESHOOTING 3.15.3.1 STARTING WITH BOOSTER CABLES q When starting the engine with the aid of another machine, connect the batteries in parallel. q When connecting the cables, avoid any contact between the positive cable (+) and the negative cable (–). q When starting the engine with booster cables, always wear safety goggles. q Take care to avoid any contact between the machine to be started and the machine used as starting aid, in order to avoid sparks and therefore the explosion of the hydrogen produced by the batteries. The explosion of the battery causes serious damage and injury.

q Take care not to invert the cables and connect the earth cable (–) last, as far from the battery as possible. q Remove the cables with great care; prevent the cables disconnected from the battery from touching other parts of the machine, in order to avoid the explosion of the hydrogen. IMPORTANT q The cables and pliers must be suitable for the current load that must be transferred. q The battery used as starting aid must have greater capacity or at least the same capacity as the battery of the machine to be started. q Make sure that the cables and pliers are neither corroded, nor damaged. q Make sure that the pliers hold the terminals firmly.

CONNECTING THE CABLES AND STARTING THE ENGINE RWA00740 1 - Make sure that the ignition key is in position « ». 2 - Connect the positive poles (+) of the two batteries with each other (A). A 3 - Connect the cable of the negative terminal (-) of the charged battery to the earth block of the machine to be started (B). 2 1 1 4 - Start the engine of the machine that supplies current and increase its speed. Spent battery Charged battery 5 - Start the engine of the failed machine. (See "3.6.2 STARTING THE ENGINE"). B Engine block to be starded 2 REMOVING THE CABLES When the engine has started, remove the cables in the reverse order with respect to their connection.

RWA00850 A 1 - Disconnect the negative cable (-) from the earth block of the engine that has been started and then from the battery (B). 1 2 2 2 - Disconnect the positive cable (+) first from the battery used as starting aid and then from the discharged battery (A). Spent battery Charged battery B 1 Engine motor to be started 162 WARNING