Komatsu — 4.2.1.2 COOLANT

MAINTENANCE NOTES 4.2 MAINTENANCE NOTES q Use only Komatsu genuine spare parts. q Do not mix different types of oil. q Unless specified otherwise, the oils and the coolant used by Komatsu to fill the tanks before the delivery of the machine are the following: TANK /RESERVOIR SPECIFICATIONS Engine oil SAE 15W-40 Specifications: API CI-4, ACEA E7 Hydraulic system oil SAE 10W-30 Specifications:

API CF - CF2 - CD Biodegradable hydraulic system oil (Only for machines in which synthetic biodegradable oil type HEES not of plant origin is used) SHELL NATURELLE HFX-32 Hydraulic transmission oil GM DEXRON ® II D Front and rear axle oil UTTO FLUID Braking system oil GM DEXRON ® II D Fuel With ambient temperature over -10° C: ASTM D975 N. 2 diesel oil With ambient temperature under -10°C: ASTM D975 N. 1 diesel oil Radiator Special permanent antifreeze, biodegradable, ethylene glycol based with corrosion inhibitor and with no silicates, borates, nitrates, phosphates and amines. Red antifreeze suitable for aluminium radiators, diluted with water (50%) to ensure protection down to -36°C.

GM DEXRON ® II D (DEXRON ® is a registered trademark of General Motors Corporation) 4.2.1 NOTES REGARDING THE ENGINE 4.2.1.1 ENGINE OIL q The engine oil must be selected very carefully, since it lubricates the engine, which is the machine’s heart; the main maintenance operations required for the engine oil are the following: 1 - daily check of the oil level; 2 - check of the degree of pollution of the oil; 3 - periodical change. 4.2.1.2 COOLANT q The coolant serves to keep the engine at the correct temperature and therefore to ensure optimal operating conditions; check the coolant level in the expansion tank daily and top up when necessary.

q The coolant containing antifreeze is flammable; do not use naked flames near the coolant and do not smoke while topping up. 170