FUEL, COOLANT AND LUBRICANTS 4.3.1 LUBRICATION WITH GREASE LUBRICATION POINTS CONSISTENCY TYPE Joints, transmissions, fork guides,door hinges NLGI 2 Lithium EP + MoS 2 Hydraulically-controlled sliding plate guides (if installed) NLGI 1 Mineral oil + graphite + aluminiumcomplex soap IMPORTANTE q When the diesel oil sulphur content is less than 0,5%, change the engine oil according to the periodic maintenance intervals indicated in the operation and maintenance manual. If the diesel oil sulphur content exceeds 0.5%, change the engine oil according to the following table:
Sulphur content Engine oil change interval from 0.5 to 1.0% over 1.0% 1/2 of regular interval 1/4 of regular interval q Use engine oil with API CI-4 o ACEA E7, E5, E4 classification, to ensure the correct and constnat operation of the engine. q Use Komatsu genuine products whose characteristics have been specifically formulated and approved for use in the engine, in the work equipment hydraulic circuit, in the transmission, in the axles and in the brakes. First filling quantity: total quantity of oil, including the oil for the components and pipes. Oil change quantity: quantity of oil necessary to fill the system or unit during the normal inspection and maintenance operations. ASTM:
American Society of Testing and Materials SAE: Society of Automotive Engineers API: American Petroleum Institute UTTO: Universal Tractor Transmission Oil NLGI: National Lubricant Grease Institute 175