MAINTENANCE PROCEDURES 4.8 MAINTENANCE PROCEDURES 4.8.1 WHEN REQUIRED 4.8.1.a CHECKING, CLEANING OR CHANGING THE ENGINE AIR FILTERS AVVERTENZA q Remove the air filter only after stopping the engine and do not start the engine if the air filter is open. q Wear safety goggles during the cleaning operations. IMPORTANTE q The air filtering system consists of a primary filtering element with considerable capacity and of a secondary cartridge that ensures additional safety protection. The primary element can be cleaned with compressed air, while the safety cartridge can only be changed.
q The filter must be cleaned when the clogging warning light (A) positioned on the side dashboard comes on or flashes. To reach the air filter lift the loader arm, engage the mechanical safety lock and open the engine hood (see "3.5.1 ENGINE HOOD"). To clean the primary element, proceed as follows: & " 1 - Release the safety retainer (1), moving it toward the outside. 2 - Turn the cover (2) counterclockwise by approximately 12.5°. 3 - Lift the cover (2) and extract the filtering element (3).
4 - Slightly strike the filtering element (3) on the palm of your hand, in such a way as to remove the dust, and blow compressed air on the inner surface, keeping the air jet at a distance of approximately 15 cm and taking care to prevent the pressure from exceeding 4-5 bars. 5 - After the cleaning operations, inspect the filtering surface for damage by introducing a lamp into the cartridge and carefully check the gaskets of the front seals. If the cartridge is damaged, replace it. 6 - Carefully clean the inside of the filter housing (4), taking care to prevent foreign bodies from getting into the suction duct.
7 - Put back the filtering element (3), making sure that it fits perfectly in its seat. 191