Komatsu — 4.8.3.d CHECKING THE ENGINE OIL LEVEL

MAINTENANCE PROCEDURES 4.8.3.c CHECKING THE FUEL LEVEL q When refuelling, avoid spilling fuel, since this may cause a fire hazard. If fuel is spilled, wipe it up immediately. q Fuel is flammable; do not use naked flames and do not smoke when refuelling. q Hold the fuel gun constantly in contact with the filler. To check the fuel level, use the fuel gauge positioned on the side dashboard (1). Do not fill the tank completely, but leave enough room for the fuel to expand. IMPORTANTE q It is advisable to refuel after work, in order to avoid the formation of condensate. q Refuel also when the low fuel warning light on the front dashboard comes on.

q After refuelling, screw the filler cap (2) thoroughly and lock it. 4.8.3.d CHECKING THE ENGINE OIL LEVEL q Soon after the machine has been stopped the engine is very hot and may cause burns; let the engine cool down before carrying out any check. The dipstick (1) can be reached after opening the engine hood. See "3.5.1 ENGINE HOOD". The oil level must be checked with cold engine and the machine parked on level ground. The oil level must be checked on the graduated dipstick (1) and must be included between the MIN. and MAX. marks; if the level is near the MIN. mark, top up with oil suitable for the ambient temperature, as indicated in the lubricant chart.

(See "4.3 FUEL, COOLANT AND LUBRICANTS"). IMPORTANTE q If it is necessary to check the oil level during or soon after work, stop the engine and wait 15 minutes before carrying out the check. 202 AVVERTENZA AVVERTENZA