INSTRUMENTS AND CONTROLS 2 - BRAKE PEDALS q 2 or 4 th gear is engaged and when the machine travels on roads. q Non-compliance with this rule may result in serious accidents. A The machine is provided with two split brake pedals that make it possible to turn sharply in small work areas with many obstacles; with the right pedal it is possible to make sharp turns to the right, with the left pedal it is possible to make sharp turns to the left. When the pedals (2) are used individually, reduce the speed and keep the bucket as low as possible.
The pedals must always be connected with each other by means of the connection pin (A) when the high gears are engaged and when the machine travels on roads. RWA13950 2 IMPORTANT q When the machine is running at high speed and only with the 4th gear engaged, the braking power is increased with the automatic engagement of the four-wheel drive. A RWA13960 3 - ACCELERATOR Use the accelerator with care, especially when the machine is under strain or is working in difficult conditions. Avoiding useless accelerations means reducing consumption and extending the service life of both the engine and the machine. 94 WARNING rd