Operation 3.2 Explanation of components 1. Torque converter oil temperature gauge This meter (1) indicates the torque converter oil temperature. B During normal operations, the indicator should be in the white range (A). C If it enters red range (B) during operations, caution lamp (C) inside the torque converter oil temperature gauge will light up. At the same time, the central warning lamp lights up and the alarm buzzer sounds intermittently. A In addition, “E02“ is displayed on the top line of the character display and “TC OVERHEAT“ is displayed on the bottom line. GK032113 Run the engine at a midrange speed under no load and wait for the indicator to return to the white range (A). 2.
Engine cooling water temperature gauge This meter (2) indicates the engine coolant temperature. B During normal operations, the indicator should be in the white range (A). C If the indicator enters red range (B) during operations, caution lamp (C) inside the engine coolant temperature gauge lights up. At the same time, the central warning lamp lights up and the alarm buzzer sounds. In addition, the top line of the character display displays “E02“ and the bottom line displays “ENGINE OVERHEAT“. A GK032114 Run the engine at a midrange speed under no load and wait for the indicator to return to the white range (A). 3.
Hydraulic temperature gauge This meter (3) indicates the hydraulic oil temperature. B It should be in white range (A) during operations. If it enters red range (B) during operations, caution lamp (C) inside the hydraulic oil temperature gauge will light up. At the same time, the central warning lamp lights up and the alarm buzzer sounds intermittently. C A In addition, “E02“ is displayed on the top line of the character display and “HYD OVERHEAT“ is displayed on the bottom line. GK043016 Run the engine under no load at a mid-range speed and wait until the indicator goes down to white range (A). WA470-6H – VEAM946100 3-33