Operation 3.2 Explanation of components 10. Front working lamp switch a Always turn the working lamp off before traveling on public roads. b When turning the front working lamp ON, operate the lamp switch to turn the side clearance lamp ON or the head lamp ON, then operate this switch (10). GK038026 Position (a): Working lamp lights up Position (b): Working lamp goes out If position (a) is pressed, the pilot lamp will light up and the work- ing lamp circuit will be switched ON. If the lamp switch is not at the ON position for the side clearance lamp or head lamp, the working lamp will not light up. 11.
Rear working lamp switch a Always turn the working lamp off before traveling on public roads. b When turning the rear working lamp ON, operate the lamp switch to turn the side clearance lamp ON or the head lamp ON, then operate this switch (11). GK038027 Position (a): Working lamp lights up Position (b): Working lamp goes out If position (a) is pressed, the pilot lamp will light up and the work- ing lamp circuit will be switched ON. If the lamp switch is not at the ON position for the side clearance lamp or head lamp, the working lamp will not light up. WA470-6H – VEAM946100 3-47 WARNING WARNING WARNING WARNING