3.2 Explanation of components Operation 3.2.13 Fuse NOTE Before replacing a fuse, be sure to turn off the starting switch. The fuses protect the electrical equipment and wiring from burn- ing out. 1 2 If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse. Replace the fuse with another of the same capacity. Inside rear console box Loosen knob (1) at two places, then remove cover (2). The fuse boxes are A and B. A B GK038052 Fuse capacity and name of circuit Fuse box A 1 2 3 4 5 6 9 7 10 8 11 12 13 14 15 GK032161 3-70 WA470-6H – VEAM946100 No.
Fuse capacity Name of circuit (1) 10A Left front lamp (2) 10A Right front lamp (3) 10A Left clearance lamp (4) 10A Right clearance lamp (5) 20A Main lamp circuit (6) 10A Instrument panel B Load meter printer (Option) (7) 5A Air conditioner B (8) 20A Air conditioner A (9) 10A Wiper, washer (10) 20A Backup lamp, brake lamp (11) 10A Work equipment positioner, Work equipment controller A (Option) (12) 5A Emergency steering (13) 5A Parking brake (14) 10A Transmission control A (15) 10A Horn