3.2 Explanation of components Operation Method of operation Cooling operation 1. Press main power switch (1) of the air conditioner to turn the power ON. 6 2 5 2. Press fan switch (2) and set the air flow to “Hi“. 4 3. Press temperature control switch (3) to set to the desired temperature. 1 4. Press air conditioner switch (4) to turn the air conditioner switch ON. 7 GK047062 3 5. Press RECIRC/FRESH selector switch (5) to select RECIRC. 6. Press mode selector switch (6) to set the vents to FACE. 7. When the temperature inside the cab goes down, use the temperature control switch and the fan switch to set to the desired temperature. 8.
When the AUTO switch is pressed, the temperature and location of the vents are automatically selected. REMARK Note that if the temperature control switch is pressed to set the temperature to the lowest position, and the air conditioner is run for a long time with the air flow at “Lo“, in rare cases, the evapo- rator may freeze. If it freezes and no cold air comes out, turn the air conditioner switch OFF, raise the temperature setting, run the air conditioner with the air flow at “Hi “ for a short time, then turn the air condi- tioner switch ON again. Heating operation 1. Press main power switch (1) of the air conditioner to turn the power ON. 5 2 4 2.
Press fan switch (2) and set the air flow to “Hi“. 3. Press temperature control switch (3) to set to the desired temperature. 1 4. Press RECIRC/FRESH selector switch (4) to select FRESH. GK047062 3 5. Press mode selector switch (5) to set the vents to FOOT. 6. When the temperature inside the cab goes up, use the tem- perature control switch and the fan switch to set to the desired temperature. 7. When the AUTO switch is pressed, the temperature and location of the vents are automatically selected. REMARK Heating is carried out using the engine cooling water, so it can be carried out when the cooling water temperature is high. 3-84 WA470-6H – VEAM946100