Operation 3.3 Operation REMARK If plug (2) is stiff, coat O-ring (5) of plug (2) with grease. a 1. Set a fuel container under drain hose (4). 2. Loosen plug (2), then drain all the sediment together with the fuel from drain hose (4). 5 2 3. Check that nothing comes out from drain hose (4), then remove plug (2). 4. Coat O-ring portion (5) with a suitable amount of grease. When doing this, be careful not to let the grease get on the drain valve water drain port (a) or the plug thread. 4 GK038072 5. Screw in plug (2) by hand until it contacts the bottom. 6. Remove the fuel container.
If transparent cap (3) is dirty and the contents cannot be easily seen, clean transparent cap (3) when replacing the fil- ter. When washing, if plug (2) is removed, coat the O-ring with grease, then tighten by hand until it contacts the bottom. WA470-6H – VEAM946100 3-95