3.3 Operation Operation Precautions when driving machine When the machine travels at high speed for a long distance, the tires become extremely hot. This causes early wear of the tires, so it should be avoided as much as possible. If the machine must be driven for a long distance, take the following precau- tions. ! Follow the regulations related to this machine, and drive carefully. ! Before driving the machine, carry out the checks before starting. ! The most suitable tire pressure, travel speed, or tire type dif- fer according to the condition of the travel surface. Contact your KOMATSU distributor or tire dealer for information. !
When traveling on a paved road surface using normal tires (26.5-R25), the guideline for the appropriate tire inflation pressure and travel speed is as follows. Tire inflation pressure: 0.30 MPa Travel speed: 14 km/h ! Check the tire pressure before starting, when the tire is cool. ! For longer drives, breaks have to be taken at regular inter- vals, otherwise the tires will be damaged. Ask your tire dealer for drive and break times for the tire type on your machine. ! During each break, inspect the tires and other parts for dam- ages and check the oil and cooling medium levels. ! Always travel with the bucket empty. ! Never put “calcium chloride“ or “dry ballast“ in the tires when traveling.
3-138 WA470-6H – VEAM946100