3.3 Operation Operation 3.3.13 Checks after completion of operation Before stopping engine Check the engine water temperature, engine oil pressure, torque converter oil temperature, and fuel level with the machine moni- tor. If the engine has overheated, do not stop it suddenly. Run the engine at a midrange speed to allow the engine to cool down before stopping it. After stopping engine 1. Walk around the machine and check the work equipment, body work, and undercarriage, and check also for oil and water leakage. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud affixed to the undercarriage.
3-144 WA470-6H – VEAM946100